RSR01 measuring caliper

RSR01 (Rifle Stock Regulator 01) is a tool especially designed to assist you in the optimal adjustment of all the moving parts of the Futur-K6Am system: comb height, pitch, movements and rotations of the buttplate etc.

Assisted setup of yours personal parameters

With the RSR01 caliper you will be able to chart your optimal adjustment settings, in terms of comfort and shooting setting, and make your personal parameter checklist. It will become easier to do the Futur-K6AM stock setup for the discipline that you are going to practise, working on the adjustment of all moving parts, with modifications and corrections, to always have a perfect feeling with your rifle.

1. Pitch adjustment

By positioning the rear transparent panel so that it is parallel to the aluminium part of the buttplate, the angle of the rifle stock on the shooting line (pitch) can be detected with the side fan goniometer.

2. Adjusting the rotation and deviation of the rifle stock

By observing the back of the rifle stock through the transparent panel as in the picture, both the side deviations from the axis of the rib and angle of rotation of the surfaces of longitudinal symmetry, that of the rifle and that of the buttplate, can be detected

3. Adjusting the height of the buttplate and the comb

With the feeler moving horizontally and vertically, we can detect the position of the comb in relation to the rib; from the top (which is the highest point of the comb), to the bottom (which is the lowest point). By moving the feeler in the same way, we can measure the height of the buttplate, again referring to the measure of the rib. The horizontal measuring scale has the function of referring to the horizontal position of the feeler, when the latter detects vertical values.

4. Positioning of the caliber on ribs of different widths

The caliper can be used for both 10-mm and 11-mm – width ribs, by simply matching the bar (which contains the magnetic supports) on the body in the two possible ways rotated by 180°. The magnetic supports, in fact, have rails 10 mm and 11 mm wide, respectively.

1. Pitch adjustment

By positioning the rear transparent panel so that it is parallel to the aluminium part of the buttplate, the angle of the rifle stock on the shooting line (pitch) can be detected with the side fan goniometer.

3. Adjusting the height of the buttplate and the comb

With the feeler moving horizontally and vertically, we can detect the position of the comb in relation to the rib; from the top (which is the highest point of the comb), to the bottom (which is the lowest point). By moving the feeler in the same way, we can measure the height of the buttplate, again referring to the measure of the rib. The horizontal measuring scale has the function of referring to the horizontal position of the feeler, when the latter detects vertical values.

2. Adjusting the rotation and deviation of the rifle stock

By observing the back of the rifle stock through the transparent panel as in the picture, both the side deviations from the axis of the rib and angle of rotation of the surfaces of longitudinal symmetry, that of the rifle and that of the buttplate, can be detected

4. Positioning of the caliber on ribs of different widths

The caliper can be used for both 10-mm and 11-mm – width ribs, by simply matching the bar (which contains the magnetic supports) on the body in the two possible ways rotated by 180°. The magnetic supports, in fact, have rails 10 mm and 11 mm wide, respectively.

Do you want to know more about Futur-K6Am rifle stock?